Arcams allra bästa förstärkarkombination för hemmabio heter AV888 och P777. Processorn AV888 är lika funktionellt kompetent som AVR600, men med en prestanda utan minsta kompromiss.
Slutsteget P777 ger kraft nog att driva även riktigt stora högtalare till öronbedövande nivåer, alltid med samma kristallklara, dynamiska precisionsljud man förväntar sig från Arcam.
The FMJ AV888 redefines both the feature set and sonic performance of high end AV processing and pre-amplification. The result of a massive 2 ½ year ground-up development programme, it features all new state of the art audio stages and balanced audio connectivity. Combined with its natural partner, P777 power amplifier, the AV888 represents a new standard for AV amplification.
Analogue Audio
* Audiophile quality components for best sound quality
* Multi-channel 7.1 analogue input for DVD-A or SACD sources
* Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources
* 9 x stereo analogue inputs (including one MM phono input & front 3.5mm AUX input)
* Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone)
* Zone 3 stereo audio, from analogue inputs, linked to Zone 2, volume control independent
* Support for iPod via Arcam rLead / rDock (independent of RS232 connection)
Digital Audio
* State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding
* Wolfson 8741 high end 24bit 192kHz audio DACs
* Crystal Semiconductor stereo ADC and precision electronic volume controls
* Burr Brown DRV134 Balanced line drivers
* Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio*
* DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6**
* Dolby Volume gain management and Tonal correction processing*
* Dolby Volume processing for balancing of program material gain and tonal balance
* Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz
* 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input
* Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources with auto lip-sync for compatible displays
Video
* 5 x HDMI inputs 1.4 (up to 1080p, Deep Colour)
* 2 x HDMI outputs 1.4 (up to 1080p, Deep Colour)
* 5 x Component inputs, one monitor output (up to 1080i)
* 5 x S-video inputs, one monitor output, 2 tape outputs
* 5 x Composite video inputs, one monitor output, 2 tape outputs
* Full video up/down conversion & frame rate conversion of all inputs where technically allowed
* Video enhancements (per input): Edge enhancement, Mosquito noise, Random noise, Block noise reduction
Custom Install Features
* Independent Zone 2 (audio & video), with fixed/variable volume
* Zone 3 audio with fixed/variable volume (follows Zone 2)
* Balanced audio outputs (XLR) for long cables or active speakers
* RC-5 remote input jacks for all three zones
* IP control over Ethernet
* IR pass through for source components
* Full suite of discrete IR RC-5 codes, including separate on / off etc
* 12Volt triggers, on / off for zones 1, 2 and 3
* Full duplex RS232 control input for more complex control systems
* Audio streaming and Internet radio via Ethernet port
General
* Supplied with back-lit CR102 learning remote
* control with support for up to 7 other components and a huge on-board code library
* Large, high contrast dimmable VFD front panel display
* User switchable between 120 & 230 volt
* mains supplies
* Size: 435x415x185mm
* Weight 12kg